LMP2011: Noise analysis simulation

Adrian Unkeles1

Part Number: LMP2011
Other Parts Discussed in Thread: TINA-TI, OPA335, , LMP2012

I am trying to run noise analysis on this part, but have repeatedly run into an error message: "Access violation at address 00874877 in module 'TINA.EXE'. Read of address 00000000."

I re-installed TINA-TI as this seemed like a binary issue, but, to no avail . Please help me diagnose this issue.

Regards,

-Adrian

over 4 years ago

0 Adrian Unkeles1 over 4 years ago

Prodigy 210 points

By the way, I listed the LMP2011 as the part only because the forum wanted me to. I also wanted to test the OPA335 with the same test harness and am seeing the same error message pop up upon attempting noise analysis.

Also relevant information may be that I'm using TINA-TI version 9.3.200.277 SF-TI. This was the latest version available as of 5/4/2020.

-Adrian