INA381-Q1: Specifications of RESET pin

Hidekazu Someno

Expert 5130 points

Part Number: INA381-Q1

Hi Team,

A customer asks us the following specifications related to RESET pin.

1. VIN threshold

2. Input impedance

3. Pull-up or pull-down resistance value (or correct source), if there is on chip.

Please tell them.

Regards,

H.Someno

over 5 years ago

0 Guang Zhou over 5 years ago

TI__Mastermind 34660 points

Hi Someno-san,

Please find below answers:

1 VIN thresholds are listed in the spec table:

2 Input impedance is typically over 100 Megohms.

3 There is no pull-up or pull-down resistance, or current source on chip for similar purpose. Therefore the input level must be defined by user externally.

Regards, Guang

Amplifiers

Amplifiers forum

INA381-Q1: Specifications of RESET pin