This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
the behavior of INA303 in TINA-TI has a problem, i am using a bidirectional current sensing scheme, the LIMIT1 works fine but LIMIT2 is always pulled low. i tried switching between both current setting resistors still the same behavior. INA303.TSC
Hello Omar,
This is a known issue. The pull-up resistor on the DELAY pin to VCC must be removed for ALERT2 to function correctly. I've adjusted it in your circuit and now ALERT2 works well.
Best regards,
Ian Williams
Applications Manager
Current Sensing