This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team,
Do we test below items marked by red box? If so, where can I find the test data? I didn't find it in the datasheet.
Thanks & Best Regards,
Sherry
Hi Sherry,
I found a document listing all the related AEC-Q100 compliance/qualification specifications performed by TI on the OPA361Q1. I have attached the document below for you to examine.
In summary, neither of the two sub-tests of the MIL-STD 202F (that you highlighted in red) are performed/tested. Both the 201A (Vibration) and 213C (Shock) tests are absent from the document; the OPA361-Q1 has no functionality/ability guarantees regarding those two specifications.
I found the portal/website where any TI part can be queried for its AEC-Q100 test results. If you find yourself doing a lot of work with AEC-Q100 result questions, I could send you an email with the link at your request.OPA361AQDCKRQ1-738572.pdf
Please reference the third column of each page of the document, labeled "Test Spec", to review the test results for the OPA361-Q1.
I cannot speak to whether TI has capability to perform either the shock or vibration test, or whether a decision to exclude the OPA361-Q1 was made. My response is based on the knowledge I gained reading the document I provided to you, as well as MIL-STD-202 and AEC-Q100 spec information.
Best,
Alec Saebeler