• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 890 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XTR300: Single supply for XTR300

Milind Potdar
Prodigy 10 points
Part Number: XTR300
Other Parts Discussed in Thread: LT1054

Hi, 

Just curious if I can use single supply for XTR300. I want output 0-10V or 4-20mA. 

Regards

Milind 

  • 0
    TI__Expert 5830 points
    Hello Milind,

    The XTR300 is designed to work with only dual supplies. If you only have a single supply (such as 15V supply) one an option would be to use a LT1054 to provide a negative rail (example: -5V) which will enable the output swing 0-10V (will be within the output swing limit of the device).

    Best regards,

    Errol Leon
    Texas Instruments
    Precision Op Amp Applications