TIM Green's OP AMP Stability Analysis 4 PPT files

Hari T O0

Genius 3820 points

Hi Team,

I checked the below link for TIM Grees OPAMP Stability analysis 4PPTs

http://e2e.ti.com/support/amplifiers/precision_amplifiers/w/design_notes/2645.solving-op-amp-stability-issues.aspx

Unfortunately, it was not there. Could you please send me the same.

Regards

hari

over 7 years ago

0 Tim Green1 over 7 years ago

TI__Expert 6275 points

We will re-post in another link soon but attached is here for your use. Let me know if any questions.

Solving Op Amp Stability 2015_TG.pptx

0 Hari T O0 over 7 years ago in reply to Tim Green1

Genius 3820 points

Hi Tim,
Thank you very much for your time and concern.
I have not completely gone through the attached document.
May I know you have any stability analysis document which describes how to check when there are multiple opamps in a circuit or Opamp and combination of other devices like BJT,MOS etc

Regards
Hari

0 Jose Maria Gomez over 7 years ago in reply to Tim Green1

Prodigy 50 points

Dear Tim, thanks for the slides, I've been trying to buy your book on opamp stability but I cant seem to find on amazon or any other book supplier for that matter, where can I buy it?

0 Dennis Goeke over 7 years ago in reply to Jose Maria Gomez

TI__Genius 11135 points

Jose

Are you referring to the Analog Engineer's Pocket Reference? This is currently only available as an eBook, which can be downloaded at the link in the slideshow, and here:

www.ti.com/.../support-training.html

Regards
Dennis

0 Jose Maria Gomez over 7 years ago in reply to Dennis Goeke

Prodigy 50 points

No, I was actually refering to this book: www.amazon.com/.../0750685263

0 Dennis Goeke over 6 years ago in reply to Jose Maria Gomez

TI__Genius 11135 points

Jose

This is still a work in progress and has not been published yet. Unfortunately there is no eta at this point.

Regards
Dennis

0 Tim Green1 over 6 years ago in reply to Hari T O0

TI__Expert 6275 points

With a BJT following op amp I attach a presentation of interest. Also I attach a presentation with a technique I call the "Double L Break" useful for composite amplifier circuits, etc. I do not yet have these available yet on TI.com or other formats but I think you will find the material of use.

Stability for Op Amps Part 5.pdf Dual FB Beta_plus and Beta_minus RevD.pptx

Amplifiers

Amplifiers forum

TIM Green's OP AMP Stability Analysis 4 PPT files