• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 634 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA381-Q1: Specifications of RESET pin

Hidekazu Someno
Expert 5130 points

Part Number: INA381-Q1

Hi Team,

A customer asks us the following specifications related to RESET pin.

1. VIN threshold

2. Input impedance

3. Pull-up or pull-down resistance value (or correct source), if there is on chip.

Please tell them.

Regards,

H.Someno

  • 0
    TI__Mastermind 36720 points

    Hi Someno-san,

    Please find below answers:

    1 VIN thresholds are listed in the spec table:

    2 Input impedance is typically over 100 Megohms.

    3 There is no pull-up or pull-down resistance, or current source on chip for similar purpose. Therefore the input level must be defined by user externally.

    Regards, Guang