Part Number: J721S2XSOMXEVM
In Security Enforced (HS-SE) devices, the JTAG port is closed by default. The below table shows the default state of the JTAG on various device types.
This prevents debugging entirely—even for non-secure cores—until the…
Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM
During boot or reboot, seeing the following error logs, or similar when using PCIe in the system:
ITS queue timeout (8896 8832) / ITS cmd its_build_mapd_cmd failed
... or related GIC…
Part Number: AM62L Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH
The AM62L OTP Keywriter is a new keywriter package for AM62L devices. While the programmable eFuse fields and X.509 certificate structure are largely the same as the AM62x OTP…
Other Parts Discussed in Thread: SYSCONFIG The System Firmware (SYSFW) on AM64x and AM243x devices supports a Security Handover mechanism, which controls the transfer of security ownership between SYSFW and the application host. The full feature description…
Part Number: AM6442
Prior the SDK version v1
This FAQ discusses the steps to enable the MCELF encrypted boot in the MCU+ SDK v12.01.00.33 for AM64x and AM243x devices.
Part Number: AM2612-Q1 Other Parts Discussed in Thread: UNIFLASH
Hi expert,
Please provide steps to flash AM261 using UniFlash CLI tool.
Provide commands for relevant operations as well
Part Number: MSPM33C321A Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG
1. Background
For bank swap, what really swapped is the address of bank0 and bank1. However for MSPM33C321A, not only MAIN FLASH but also NONMAIN FLASH will swap the…
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VL , TDA4VM , TDA4VH
What data throughput can be achieved on TDA4 device in theory, and what throughput can be measured? And how to achieve measured throughput?
