• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA2012D2: Measuring power level for Class D amplifier

Ernest Yong
Expert 4315 points
Part Number: TPA2012D2

Hi Team,

I would like to check with you how should we measure the power level for class D amplifier?

I understand that there is a training video on precision lab to teach measuring class D audio amplifier (Measuring Class-D Audio Performance | TI.com Video) , however the analyzer software (APx500) shown in this software is a paid software. 

Is there any free method to measure the class D amplifier?

Many Thanks!

  • +1
    TI__Guru** 104695 points

    Hi Ernest,

    If AP software and hardware is not available on your side for measurement, you may measure voltage instead with a scope or multimeter, then use the electric power formula P = V^2 / R. You should still use the same filter and other connections and just replace AP with the equipment to measure voltage.

    Best regards,
    -Ivan Salazar
    Applications Engineer