TAS2563: PDM Configuration not available on PPC3

Luis Jimenez Gonzalez

Part Number: TAS2563

How can I configure a single PDM microphone input for the TAS2563? The PPC3 application does not have the controls to enable PDM mic.

over 3 years ago

0 Ivan Salazar over 3 years ago

TI__Guru** 114525 points

Hi Luis,

I assume you're using WCSP version of TAS2563, which has not been updated yet in PPC3 to support PDM interface.
Let me reach out over private message to follow up on the support required for this application.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ivan Salazar over 3 years ago in reply to Ivan Salazar

TI__Guru** 114525 points

Hi Luis,

I'll close this thread in the forum for now. Please feel free to follow up over email thread.

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

TAS2563: PDM Configuration not available on PPC3