• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 281 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5825M: TAS5822M&TAS5825M -schematic

switch
Genius 3880 points
Part Number: TAS5825M


Hi ti team，

Please help to check whether there is any problem with the attached schematic diagram.

M18_BM3512 Radio Charger SCH Rev1.pdf

  • 0
    TI__Mastermind 20541 points

    hi switch

    1.it seems customer having lots of resistor or capacitor be used at i2s/i2c line, just make sure they double confirm whether they might make the signal worse so that no meet the spec.

    2.at the output, not sure why customer having so may lc filter at the output side. basically, just using 1set LC should be enough like the recommendation in our datasheet.

    tks

    jesse