TAS2563YBGEVM-DC: There is no TAS2563 EVM App for me to choose in the PPC3 software.

Peng Jock

Part Number: TAS2563YBGEVM-DC
Other Parts Discussed in Thread: PPC3-EVM-MB, TAS2563, PP-SALB2-EVM,

Tool/software:

I am using TAS2563YBGEVM-DC + PPC3-EVM-MB + PP-SALB2-EVM for Learning Speaker, but there is no TAS2563 EVM App for me to choose in the PPC3 software. After connecting to the Internet and updating, the TAS2563 EVM App also does not appear.

4 months ago

+1 Ivan Salazar 4 months ago

TI__Guru** 109185 points

Hi Peng,

Please submit an access request here if you haven't done so: https://www.ti.com/drr/opn/TAS2563-SW

If you already have access, you may try installing the app manually following these instructions: [FAQ] PUREPATHCONSOLE: How to Install PurePath︎ Console 3 Device Apps Manually - Audio forum - Audio - TI E2E support forums

Best regards,
-Ivan Salazar
Applications Engineer

0 Peng Jock 4 months ago in reply to Ivan Salazar

Prodigy 50 points

Hi Ivan
I have installed the TAS2563 EVM, but when I click to enter, a message "You have a different version of EVM" appears.
Click the "Connect" button below, but still cannot connect to the EVM Board

0 Ivan Salazar 4 months ago in reply to Peng Jock

TI__Guru** 109185 points

Hi Peng,

The warning message is expected for now, so you can ignore it.

What happens when you click on Connect? Do you see the EVM connecting briefly and then see the same Connect button again?
Please share a picture of the jumpers on the PPC3-EVM-MB, I want to verify the ones under the TAS2563 daughter card.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ivan Salazar 4 months ago in reply to Ivan Salazar

TI__Guru** 109185 points

Hi Peng,

Please disregard, I'll follow up on this other thread which seems to be the same question: TAS2563YBGEVM-DC: PPC3 Software can not connect TAS2563 EVM - Audio forum - Audio - TI E2E support forums

Best regards,
-Ivan Salazar
Applications Engineer