USB to I2S Audio Bridge

Paul Joseph

Expert 2795 points

I am looking to implement a USB to I2S bridge, I require 24 bit, up to 192kHz sample rate.

Any devices to support this implementation?

0 Nate Enos over 11 years ago

Hello Paul,

Thank you for the post. There is a good discussion here about this exact question: http://e2e.ti.com/support/data_converters/audio_converters/f/64/t/156678.aspx

essentially the tas1020b is the only device we have to offer but it is not recommended for new design. The workaround is a c5xxx DSP.

Please let me know if you need anything else,

Nate

Audio forum