• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 375 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5766M: DAC Mode and Mono/PBTL register

Satoshi
Guru 19615 points
Other Parts Discussed in Thread: TAS5766M, PCM1792

Please let me know about two point below of TAS5766M.

①DAC Mode（Page 72）

　Is there detailed information of difference for DAC mode-1 and mode-2?

　※Mode-1 is recommended, Mode-2 is differ the tonality and flavor in the audio output.

　　I want to know detailed differences in this point.

②Mono/PBTL

　If there change register point in the case of change Stereo to Mono/PBTL output, please let me know.

Best regards,

Satoshi

  • 0
    TI__Guru 52115 points
    Hi Satoshi,

    See my comments below:
    a) DAC Mode
    Andy : Here are something I have found so far:
    0: Mode1 - New hyper-advanced current-segment architecture
    1: Mode2 - Classic PCM1792 advanced current-segment architecture

    b) Mono/PBTL
    Andy : The internal register map is the same as long as the same process flow is used. The Mono/PBTL mode is basically a hardware change.

    Andy