Hello team,
Is it possible to use the CDCLVC1110 as a data line buffer instead of using it as a clock buffer where the duty cycle is not critical?
Regards,
Carlo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello team,
Is it possible to use the CDCLVC1110 as a data line buffer instead of using it as a clock buffer where the duty cycle is not critical?
Regards,
Carlo
Hi Carlo,
CDCLVC1110 doesn't have any retiming stages, and should be usable as a data buffer provided the minimum data rate is <125Mbps at 3.3V (corresponding to a maximum frequency of 250MHz) or <90Mbps at 2.5V (corresponding to a maximum frequency of 180MHz).
Regards,
Derek Payne