TRF3765: Schematic of 2 units of TRF3765

yeow teng toh

Prodigy 60 points

Part Number: TRF3765

I plan to use 2 units of TRF3765 on single PCBA. And to program for 2 sets of separate LOs.

I need advice to how to schematic entry on these 2 units TRF3765.

How do I connect the 4 wire interfaces.?

Thanks in advance!

over 3 years ago

0 Kang Hsia over 3 years ago

TI__Guru 72589 points

Hi Yeow,

You may refer to the TRF3765 EVM schematic and layout for reference

https://www.ti.com/lit/zip/slwc103

https://www.ti.com/product/TRF3765#design-development

The 4 wire interface is the same as any standard Serial Interface.

The two TRF3765 can share the same DATAIN, DATAOUT, and CLOCK line. The latch enable is addressing to either TRF3765 #1 or TRF3765 #2 from your microprocessor. They will need to have two separate lines to two different TRF3765.

Clock & timing

Clock & timing forum

TRF3765: Schematic of 2 units of TRF3765