Other Parts Discussed in Thread: LMK05028
Hi Team,
Sorry for sending you frequent question, however I need
your advice to resolve my No Lock problem.
With your advice I could make LMH05028EVM lock to a 25 MHz input.
So, I tried to make the EVM get lock to the 67.25 kHz input and create 148.5 MHz,
Or lock to 67.5/1.001 kHz input and create 148.5/1.001 MHz, but EVM did not
Lock to either of the input.
I attached to design files dedicated to 67.5 kHz input and 67.5/1.001 kHz.
Can you check these design files and give me your advice.
LMK05028-01.tcsLMK05028-02.tcs
I also have one more question,.
I tried to modify parameters in User Controls => DPLLx CTL page,
but none of them can’t be changed.
Please advise me on how to change values in User Controls => DPLLx CTL page,
Mita