Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 22 subscribers
  • Views 192 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK04208: Distribution mode additive jitter

Jean-Yves Breton
Prodigy 25 points
Part Number: LMK04208

Hi,

I am working on a design using the LMK04208NKDT. Our client has a requirement regarding the maximum additive RMS jitter on our reference clock. I am planning on using the LMK04208 CLKin1 input for the reference clock and use the device in clock distribution mode as describe in the datasheet section 8.4.2.5 We plan on using differential clocks at the input and output of the device and follow the datasheet recommendations.

I cannot find jitter performance when in clock distribution mode. Is this information available somewhere?

Thank you in advance for your help,

Jean-Yves