Are ferrite beads required on VDD_PLLx and VDD_CLKoutx? EVM has ferrite beads on L6-L11, while datasheet Figure 32 on pg43 does not show any.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Are ferrite beads required on VDD_PLLx and VDD_CLKoutx? EVM has ferrite beads on L6-L11, while datasheet Figure 32 on pg43 does not show any.
Hello Joe,
Ferrite beads are not required for VDD_PLLX or VDD_CLKoutX; however, they are highly recommend to limit crosstalk. Therefore, following the EVM schematic would be my recommendation. Hope this helps!
Good luck,
Andrea