Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 238 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCI6214: CDCI6214 : input clock specification

Amal A G
Prodigy 80 points
Part Number: CDCI6214
Other Parts Discussed in Thread: CDCE6214

Hi Team , 

Can i use a 50 Mhz CMOS clock as the single ended input to the clock generator CDCI6214 (The device is termed to support LVCMOS single ended input ). I am planning on using the DSC1001DL5-050.0000 clock oscilator from Microchip for the same. Also please advise on any AC-coupling required on board

Thank you

  • 0
    TI__Genius 17080 points

    Amal,

    We recommend using the CDCE6214 over the CDCI6214 for all new designs for improved performance and added functionality. The devices are pin to pin.

    On the CDCE6214, the reference input does not need to be AC-coupled:

    Thanks,

    Kadeem