• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM555QML: LM555H/883

Ed Taylor
Prodigy 30 points
Part Number: LM555QML
Other Parts Discussed in Thread: SE555, SE555M

What testing/screening/inspections is done to the LM555H/883?  I am looking at replacing the M38510/10901BGA  with this part but need to determine if there are differences that we need to analyze.   When NS/TI stopped making the M38510/10901BGA , was there a notice issued with recommendations to customers that can be obtained?  Thank you.

  • 0
    TI__Genius 10565 points

    Hi Ed,

    All processing, screening, and Quality Conformance Inspection (QCI) of QML Class Q products is performed to Level B in compliance with the test methods of MIL-STD-883. As the LM555H/883 is a class Q device, you may refer to the MIL-STD-883 for more information.

    The following document: Testing and Inspection of QML Class Q Ceramic Devices includes an example of class Q process flow.

    I can't seem to find any information on M38510/10901BGA, are you referring to M38510/10901BPA? M38510/10901BPA is an SE555M timer which is also a class Q device. The LM555QML is listed as a direct replacement for SE555.

    Regards,

    Zach