LMX2594EVM: LMX2594EVM SPI configuration

Amit kumar

Part Number: LMX2594EVM
Other Parts Discussed in Thread: USB2ANY, LMX2492EVM, LMX2492

Tool/software:

Hi Texas team,

We want to use LMX2594EVM board for our application. We have some enquiry about it which is given below,

1. Is it needed to buy separate reference pro board with this EVM board? or it will come with this EVM board like USB2any board.

2. Can it be directly flashed with the help of USB2any board of LMX2492EVM?

over 1 year ago

0 Noel Fung over 1 year ago

TI__Guru** 108550 points

Hi Amit,

Yes, Ref Pro comes with the kit. More information is available in the user's guide.

https://www.ti.com/lit/pdf/snau210

0 Amit kumar over 1 year ago in reply to Noel Fung

Prodigy 90 points

Thank you for clearing first query. But Can it be directly flash by USB2any of LMX2492 EVM board?

0 Noel Fung over 1 year ago in reply to Amit kumar

TI__Guru** 108550 points

Hi Amit,

I do not understand the question. Could you elaborate your question again?

0 Amit kumar over 1 year ago in reply to Noel Fung

Prodigy 90 points

There is a one more board (LMX2492EVM Evaluation board |) which can be programmed through USB2ANY board with SPI connection. The same way this board (LMX2594EVM) needs Reference pro board for programming with SPI communication. Can this board (LMX2594EVM) program through USB2ANY ?

0 Noel Fung over 1 year ago in reply to Amit kumar

TI__Guru** 108550 points

Hi Amit,

Ref Pro is same as USB2ANY without the plastic housing. You can use USB2ANY or Ref Pro to program both EVMs.

0 Amit kumar over 1 year ago in reply to Noel Fung

Prodigy 90 points

Thank you

Clock & timing

Clock & timing forum

LMX2594EVM: LMX2594EVM SPI configuration