• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 217 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCM61004: Crystal input circuit design

Lillian Liu(SH)
Expert 4620 points
Part Number: CDCM61004

Tool/software:

Hi team,

The manual describes that crystal is connected to the chip XIN at one end and the other end is grounded. Are there any detailed design references and precautions for this part of the circuit? I saw this formula, but I don’t understand how it should correspond to the schematic design? How should the peripheral circuit be configured?

Thanks

Lillian 

  • 0
    TI__Mastermind 22210 points

    Lillian,

    The schematic for the evaluation module offers a reference example:

    Ensure that you have a total capacitance (parasitic + physical capacitors) that matches the recommended capacitance specified by the crystal vendor.

    Thanks,

    Kadeem