CDCM61001 - Crystal recommendation

salamander

Other Parts Discussed in Thread: CDCM61001

Hello Support,

I am using the CDCM61001, I notice that TI is recommending to use different crystals, however those crystals have too big footprint for my application.

Can you please advise if I can use the following part number - TSX-3225 25.0000MF10P-C Manufacturer: Epson Toyocom. (see attachment)

Also please advise for any other alternative crystals.

Thanks in advance

4034.FA-238_238V_TSX-3225_E09X.pdf

over 11 years ago

0 Alan O over 11 years ago

TI__Mastermind 32575 points

Hello,

The TSX-3225 25 MHz, 10pF crystal you mentioned looks like a suitable alternative.

Regards,
Alan

0 Anthony Roselle over 11 years ago in reply to Alan O

Prodigy 10 points

Hello Support,

I am having some trouble trying to find a crystal for the CDCM61001. What are your thoughts on FXA5032B-25.00MHz made by Fox (see link). The load capacitance is 10pF. The only real flag I see is that the Drive Level is spec'd at 100uW max. The CDCM61001 states drive level should be between 100uW and 1000uW. How important is Drive Level. Is this Fox chip sufficient/

Thanks.

http://www.mouser.com/ds/2/160/FXA5032B-7636.pdf

Clock & timing

Clock & timing forum

CDCM61001 - Crystal recommendation