1kHz to 10kHz, Sin wave clock buffer

Kawai

Guru 19775 points

Other Parts Discussed in Thread: CDC3RL02, CDC3S04, LMV7219, LMH7322, LMH7220

Hi Team,

Our customer is looking for a sin wave clock buffer for 1k to 10kHz sin wave input.

Which part would best match for this requirement ?

I found the following devices, however, they did not support the above clock frequency.

CDC3RL02, CDC3S04

Do you have any recommended device for this ?

Thanks in advance.

Best Regards,

Kawai

over 9 years ago

0 Arvind Sridhar over 9 years ago

TI__Mastermind 24205 points

Hi Kawai-San,

We are not aware of any devices in the clock and timing portfolio that would satisfy this requirement. You could try posting your query on the Microcontroller or DSP forum.

Regards

Arvind Sridhar

0 Alan O over 9 years ago

TI__Mastermind 32575 points

Consider a comparator device, like LMV7219 (LVCMOS outputs), LMH7220 (LVDS outputs), or LMH7322 (PECL outputs).
Alan

0 Kawai over 9 years ago in reply to Alan O

Guru 19775 points

Arvind-san, Alan-san,

Thanks for your advices. Unfortunately, customer requirement is to output a sinusoidal wave.

I had told them to use general operational amplifier as a voltage follower which could cover their frequency and voltage range.

Best Regards,
Kawai

Clock & timing

Clock & timing forum

1kHz to 10kHz, Sin wave clock buffer