Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 481 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TI Cable Equalizer - DS30EA101

Mehrdad Bradaran
Intellectual 430 points
Other Parts Discussed in Thread: DS30BA101, DS30EA101

Hello,

In regards to LVDS buffer/equalizers, P/N: DS30EA101 and DS30BA101, the input spec for the ‘EA101 says 720mVp-p min at 0m cable length.  What is minimum with say 5m cable or 10m cable?  I’m wondering if they need to set their voltage drive level a little higher.  The data sheets show an example which they used.

Thanks,

Mehrdad.