Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • Locked Locked
  • Replies 0 replies
  • Subscribers 20 subscribers
  • Views 1117 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCP1803 - RTH Package Obsolete

Julian Hagedorn
Mastermind 20900 points

The CDCP1803RTH is now obsolete. It is replaced by the RGE package.

  • What is the reason for the replacement?
    • The RTH package was assembled by a subcontractor and RGE package is assembled by a TI assambly site.
  • Do I have to change something in my design?
    • No, the footprints of both packages are the same.

For further information about the RGE(QFN) package, please read the application report SLUA271A.