• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 382 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDS104: Enable Pull High

Russell Wetherley1
Expert 4255 points

Part Number: SN65LVDS104

Hello E2E,

Can you pull the EN pins (pins 1, 2, 3, 8) high with a 10k resistor to 3.3V?  It seems fine by me but wanted to double check.

Thanks!

Russell