Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 665 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLC2932A: Recommend replace IC

masahiko shimizu
Guru 11235 points
Part Number: TLC2932A
Other Parts Discussed in Thread: TLC2932, CDC536, CDCE813-Q1, TLC2933A

Hi,

TLC2932 and TLC2932A is NRND.
Could you let me know the IC to replace for those, please?

Best regards,
Shimizu

  • 0
    TI__Genius 16845 points

    Hi Shimizu,

    I searched through the forums and noticed that this question has been asked before : e2e.ti.com/.../2167256

    The response is still valid. I will copy in the response below for reference. I hope this information helps:

    "We have a few other simple single-PLL clock drivers that may be suitable, for example, the CDC536 or CDCE813-Q1.

    I recommend you start at the Clock & Timing landing page (http://www.ti.com/clock-and-timing/overview.html), choosing a product category, and then using the Products tab to bring up a parametric search where you can narrow down the available parts depending on your needs."

    Kind regards,
    Lane

  • 0 in reply to Lane Boyd
    Guru 19775 points
    Hi Lane-san,

    My customer is currently using TLC2932A and TLC2933A.
    Since these device family are NRND they need to replace to another device.

    The above devices, CDC536 is a clock driver and CDCE813 is clock generator.
    Our customer only uses the "PFD block" of TLC293x with external VCO.

    Does TI have a device which can be replaced in this kind of use case / requirement ?

    Best Regards,
    Kawai
  • 0 in reply to Kawai
    TI__Genius 16845 points
    Hi Kawai-san,

    I searched through our portfolio but unfortunately I wan't able to find a device which can replace the PFD block only with the exact same functionality.

    Kind regards,
    Lane
  • 0 in reply to Lane Boyd
    Guru 19775 points
    Hi Lane-san,

    I understood TI doesn't have a simple PFD device. Thanks for the support.

    Best Regards,
    Kawai