Other Parts Discussed in Thread: LMX2594EVM
Hello
I tested the Phase noise in TICS default mode.
However, the test results were check to be different from the specifications.
Test Data
Spec Data
There is a difference of about 17dBc/Hz at 100Hz.
Test conditions were the same as in the User Guide.
1. Why are the test results different from the specifications?
2. How can I check the same result as the specifications?
3. Why is the purchased LMX2572EVM different from the BOM in the user guide? (refer below)
user guide BOM : R25 - 51ohm, R30 - 51ohm, R4_LF - 0 ohm, R4_LF - 330 ohm
purchased LMX2572EVM : R25 - OPEN, R30 - OPEN, R4_LF - 18 ohm, R4_LF - 68 ohm
Best Regards.