• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 47 subscribers
  • Views 413 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS131B04-Q1EVM: Device Not Supported - Error

ADS131B04-Q1EVM: Error in GUI - Device Not Supported (70001)

Chase Jeong
Genius 5380 points
Part Number: ADS131B04-Q1EVM
Other Parts Discussed in Thread: ADS131B04-Q1, ADS131M04, ADS131M04EVM

Hello TI experts,

My customer now tests ADS131B04-Q1EVM for their new product.

but they faced error message when they connect EVM to PC.

also I found the thread below, but I could not find the solution ;

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1011400/ads131b04-q1evm-device-not-supported---error

Could you advice me to solve this problem?

Best regards,

Chase

  • 0
    TI__Guru 62765 points

    Hi Chase,

    We received the same question from Louis Han at basically the same time and have merged his thread into this thread.  We are aware of the situation with the ADS131B04 and are looking into what how to best remedy it.  The error is a result of an incorrectly programmed EEPROM on the EVM daughterboard. 

    I will contact some team members in the AM and they will help identify an appropriate path forward.

  • 0 in reply to Collin Wells
    Genius 5380 points

    Hi Collin,

    Thank you for your support.

    Yes, Louis and I work in the same team, maybe we forgot to share this issue immediately.

    please let me know if there is any update about this issue. Thanks,.

    Best regards,

    Chase

  • +1 in reply to Chase Jeong
    TI__Guru 61596 points

    Hi Chase,

    Thank you for bringing this issue to our attention. Please download and install the ADS131M04EVM GUI from the ADS131M04EVM product page. Unfortunately, due to the similarity between the ADS131B04-Q1 and ADS131M04 devices, there was a mix-up in how the EEPROMs were programmed by the CM. For now, you should be able to use the ADS131M04EVM GUI instead since the digital interface is the same in both devices. Your EVM still has an ADS131B04-Q1 device installed (U2); therefore, analog performance will still be as expected.

    Let me know if you have any additional concerns and we'll work to correct this as quickly as we can.

    Best regards,

    Ryan

  • 0 in reply to Ryan Andrews
    Genius 5380 points

    Hi Ryan,

    Thank you for your support.

    I sent your suggestion to my customer.

    I will reply to this thread if I have another question. Thanks.

    Best regards,

    Chase

  • 0 in reply to Chase Jeong
    Genius 5380 points

    Hi Ryan,

    The customer confirmed EVM operation with a program you mentioned.

    Thank you for your support.

    Best regards,

    Chase

  • 0 in reply to Chase Jeong
    TI__Guru 61596 points

    Hi Chase, thanks for the update.

    Regards,

    Ryan