TSW1400EVM: Nvidia jetson compability for TSW1400EVM

Furkan Hasan Sakaci

Part Number: TSW1400EVM

Hello,

I would like to develop software on the Linux operating system on the Nvidia Jetson kit by using TSW1400EVM and ADS54T02EVM. When I looked at the product datasheet, I saw that data can be obtained only on Windows and GUI. Is it possible to get data directly on the Linux machine by using some libraries?

over 2 years ago

0 jim s over 2 years ago

TI__Guru* 91947 points

Furkan,

This would probably require new firmware for the FPGA on the TSW1400 and new software. None of this is currently available. The board does provide options to load custom firmware using the JTAG connector or through the USB interface. All of this development would have to be done by you though.

Regards,

Jim

0 Furkan Hasan Sakaci over 2 years ago in reply to jim s

Prodigy 70 points

Do you have Linux-supported devices? I want to import ADC data with a 1GSPS sample rate to Linux machine.

0 jim s over 2 years ago in reply to Furkan Hasan Sakaci

TI__Guru* 91947 points

Not sure what you are asking for. If it is a test platform like the TSW1400EVM that supports Linux, we do not.

0 Furkan Hasan Sakaci over 2 years ago in reply to jim s

Prodigy 70 points

I want to process data on Linux Ubuntu operating system using an ADC card with a sampling rate of over 800 MSPS. Do you have a device that can transfer data to the Linux operating system?

0 jim s over 2 years ago in reply to Furkan Hasan Sakaci

TI__Guru* 91947 points

I would suggest capturing the data using HSDC Pro, then import the saved data to your Linux based machine. This is all we can offer.

Data converters

Data converters forum

TSW1400EVM: Nvidia jetson compability for TSW1400EVM