• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 290 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TSW14J58EVM: High Speed Data Converter Pro v5.20 does not support ADC12DJ5200 JMODE1. It supports only 4 JModes.

TSW14J58EVM: Error message during data capture using HSDC pro v5.20 software.

Anomitra Banerjee
Prodigy 30 points
Part Number: TSW14J58EVM
Other Parts Discussed in Thread: ADC12DJ5200SEEVM,

I am using ADC12DJ5200SEEVM and connecting it to TSW14j58EVM.

I am following ADCxxDJxx00RF Evaluation Module User's Guide (Rev. B) for configuring the device GUIs and EVMs.

When I click on capture option  in High speed Data Converter Pro v5.20, I am getting the following error,

and I am getting no data in HSDC Pro GUI. Can you please help me in this regard?