Other Parts Discussed in Thread: TSW14J58EVM, DAC39RF10
Hello,
Could you please provide the DAC39RF10EVM design files(schematic, BOM, Gerber, PCB design file, etc)?
Thank you.
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Could you please provide the DAC39RF10EVM design files(schematic, BOM, Gerber, PCB design file, etc)?
Thank you.
JH
Hi JH and Neeraj,
I am also using the DAC39RF10EVM. The board I have has RevE3 on the silkscreen. TI Engineers provided me the schematic, and it is quite different than the RevA2 design files Neeraj just posted. JH please take a look at your EVM and if it is red, then it might be the RevA2 design, but if it is green, then it might be the RevE3 design. Look at the text written on the silkscreen.
JH - What FPGA board are you using? What modes are you testing? I am using the TSW14J58EVM and will look at JMODE5 and others.
Regards,
Dave
Hi David,
My customer requested the EVM design files for design review of the DAC39RF10 device. So, they do not have an EVM yet.
Neeraj,
Are the design files you shared the latest in EVM?
Regards,
JH
HI JH,
The design files I shared are for the Latest REV of the EVM.
Regards,
Neeraj