• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 45 subscribers
  • Views 281 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSC1210Y5: MSC1210Y5PAGT

Kent Liew
Intellectual 265 points
Part Number: MSC1210Y5
Other Parts Discussed in Thread: MSC1210

Hi,

Can you please confirm the MSL level for this PN#MSC1210Y5PAGT?

My customer received the parts with 2 different MSL which is 3 and 4.

In fact, the MSL 4 was indicated for this part in TI's website.

The date codes for the MSL 3 should be 1938+5, 1825+5 and 1926.

Also, if the wrong MSL level packaging will affect the quality of parts?

Please review adn advise.

Thanks.

  • 0
    TI__Guru** 113765 points

    Hi Kent,

    The MSC1210 was qualified for MSL4 and not MSL3, so when the devices were dry packed our assembly and test site inadvertently marked the package as MSL3.  The MSL ratings are a standard device rating for a particular relative humidity and temperature for devices removed from the packaging.

    The packages once outside of the dry packing will start to absorb moisture.  If the MSL rating is exceeded, then it is possible that excessive moisture can cause an issue when the devices are put through a reflow cycle which could result in the devices being damaged if the devices have not been placed into an additional bake process first.  See additional information relating to MSL in MSL Ratings and Reflow Profiles.

    Best regards,

    Bob B

  • 0 in reply to Bob Benjamin
    Intellectual 265 points

    Hi Bob,

    Thanks for your update.