LAUNCHXL-CC1310: Step file.

Serhii Yantsevych

Prodigy 60 points

Part Number: LAUNCHXL-CC1310

Hi Team,

Does anybody has 3d step for this board, or at least positions of header and all dimensions?

Thank you

Regards,
Serhii

over 2 years ago

0 ZC over 2 years ago

TI__Mastermind 20335 points

Hi Serhii,

The design files can be found at the following link: LAUNCHXL-CC1310 (SWRC319): https://www.ti.com/lit/zip/swrc319

Regards,

Zack

0 Serhii Yantsevych over 2 years ago in reply to ZC

Prodigy 60 points

Hi Zack,

Thanks for the feedback, I don`t have software for opening the files, so I am asking for the Step, or at least the positions of two main headers, because it is not specified in the LAUNCHXL-CC1310_mech.pdf.
if nobody has these dimensions(position relative to the board edges), this topic can be just closed.

Regards,

Serhii

0 ZC over 2 years ago in reply to Serhii Yantsevych

TI__Mastermind 20335 points

Hi Serhii,

Cadence actually have a free tool for viewing the design files without needing a license, Cadence Allegro Viewer which can be found here: https://www.cadence.com/en_US/home/tools/pcb-design-and-analysis/allegro-downloads-start.html

Please let me know if this solves your issue, otherwise I will take a further look for you.

Regards,

Zack

0 Serhii Yantsevych over 2 years ago in reply to ZC

Prodigy 60 points

Hi Zack,

Thanks, that works, bat not realy prstision, it shows, that distance between headers is 40.70mm, i think it is realy 40.64mmAnyvey thit is enough for me. Thanks a lot for te support.
By the wey, the 16.6 versin of viver can open files, the newer 17.4 - can not do it.

Regards,

Serhii

0 ZC over 2 years ago in reply to Serhii Yantsevych

TI__Mastermind 20335 points

You can also measure the Gerber files included in all of our reference designs using a Gerber viewer. That may be easier than relying on the free Cadence viewer if you are just interested in board dimensions.

Using a Gerber viewer it looks to be 40.64 mm as you also found. Looking at our internal design specifications confirms this distance between the two inner 10-pin headers; all LaunchPads conform to this.

I had a look and we have the following App Notes for the standard LaunchPad form-factor, which gives the dimensions (I will include them here for future reference):

SLAA542 (Build Your Own LaunchPad or LaunchPad BoosterPack Development Kit): https://www.ti.com/lit/slaa542
SLAT157 (Build Your Own BoosterPack for TI LaunchPads): https://www.ti.com/lit/slat157

There are still teething issues between v17.4 compatibility with earlier versions of Allegro files. Thank you for flagging that. After double-checking, it seems the TI.com files may still differ from what we found in this previous thread: https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1136018/launchxl-cc1310-correct-dimension

I uploaded our up-to-date Cadence .brd files there; the Gerber files on TI.com are correct, however. Please check the files in the last reply of that thread if you require the Cadence .brd file (I just checked now and that thread is the up-to-date version).

It seems that it has still not been updated on TI.com so I will need to follow that up.

Regards,
Zack

Data converters

Data converters forum

LAUNCHXL-CC1310: Step file.