ADC12D1600RB: Where to download the reference design/layout of the board?

Alex Liu

Part Number: ADC12D1600RB
Other Parts Discussed in Thread: ADC12D1000, ADC12D1600, ADC12D1800

Hi,

I can find the reference design for ADC12D1X00, but is there same document specifically for ADC12D1600RB? If so, where to download?

Thanks,

9 months ago

0 Chase W 9 months ago

TI__Mastermind 20755 points

Hi Alex,

The design files for ADC12D1600RB can be found on the product page for ADC12D1600RB. Here is a link to the design and development section of the page which contains the files. This design supports the ADC12D1000, ADC12D1600 and ADC12D1800 devices which are all just different speeds of the same ADC. https://www.ti.com/lit/zip/snac039

Thanks, Chase

0 Alex Liu 9 months ago in reply to Chase W

Prodigy 40 points

Hi Chase,

Thank you for the quick reply. I did find the reference design in snac039.zip, but it is for "ADC12D1X00" and looks a bit different with ADC12D1600RB. So I wanted to confirm if there is a one specifically for ADC12D1600RB.

Best,

+1 Chase W 9 months ago in reply to Alex Liu

TI__Mastermind 20755 points

Hi Alex,

There is no difference in the reference design aside from the part swapping of the ADC. It can be used as reference for any of the ADC12D1x00 devices. If there is any specific questions you have towards tailoring a matching network, etc, then we are more than happy to help with that, but this design should act as a good start point.

Thanks, Chase

0 Alex Liu 9 months ago in reply to Chase W

Prodigy 40 points

Hi Chase,

Got it. Thank you!

It is just the design around clock at the real board seems to be different with the reference design.

Best,

0 Alex Liu 9 months ago in reply to Chase W

Prodigy 40 points

Hi Chase,

A follow-up question about the design layout in snac039. Comparing with the ADC12D1600RB, there are some differences, e.g. U11 relay in diagram can not be found on board, EXT CLK is supposed to be J11 in the diagram, but there is no R180 in it. It seems A side of R180 is not implemented for EXT CLK, so the external clock can not be used. Is there any way to use the external clock?

Best,