This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
Now, I am using AFE4960PEVM board and executed by Biosensing.exe Application . I have connected the SPO2 sensor in EVM board .then load the spo2 python script and executed by using biosensing .exe application , i have set the parameter in default values. I will try to plot the Spo2 waveform properly but the waveform occured more noise and captured differently...this waveform is correct or wrong ?how do approach the next step ? please give some instructions,
I got it the SPO2 waveform ,shared the image in below ,
Hello Dhivya,
We would like to take this discussion offline since the device AFE4960P is shared under selective disclosure.
Can you please reach out to biosensing_afe-support@list.ti.com along with a reference to this E2E post?