ADS131M08EVM: ADS131M08EVM

Saad Jabir

Prodigy 210 points

Part Number: ADS131M08EVM
Other Parts Discussed in Thread: ADS131M08, ADS131M04EVM

Tool/software:

Hello I installed the EEPRO loader and have the evm connected to my PC but I get the following :

after installing the jumper :

We are using ADS131M08 But the Gui shows ...M04 and we get now this error:

6 months ago

+1 Bryan Lizon86 6 months ago

TI__Mastermind 42761 points

Hi Saad Jabir,

If you have an M08EVM you will need to install the M08EVM GUI. It looks like you might have downloaded the ADS131M04EVM GUI instead. Can you please double check?

-Bryan

+1 Saad Jabir 6 months ago in reply to Bryan Lizon86

Prodigy 210 points

Hi Bryan, where do i down load the Gui from? I was working on a different project the last month.

+1 Bryan Lizon86 6 months ago in reply to Saad Jabir

TI__Mastermind 42761 points

Hi Saad Jabir,

Navigate to this link: https://www.ti.com/tool/ADS131M08EVM

Then hit download as shown below

-Bryan

Data converters

Data converters forum

ADS131M08EVM: ADS131M08EVM