This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE7225: EVM SPI Programming

Part Number: AFE7225

Tool/software:

Hello, I wanted to purchase the AFE7225EVM board. It appears that the SPI interface is mainly manipulated via a GUI.

I wanted to write custom SPI commands in software to send to the chip. This would allow me to test that my software SPI writes are correct prior to integrating this hardware on a board.

Does the EVM allow for custom commanding over this USB interface?