Tool/software:
I'm having difficulty connecting to the GUI interface as non of the steps provided previously are working. I don't have any bulk devices on my device manager just MSP432 Device firmware upgrade. I have installed all the packages below but it still wont detect a PAMB controller.
Hi Connor,
If the PAMB controller is recognized as a DFU device, then you can click File > Program Device... in the GUI to have the application flash the correct firmware onto the PAMB controller.
After the firmware is loaded, the PAMB controller should re-enumerate as a dual serial/bulk device, as described in https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/914940/faq-how-do-i-resolve-pamb-evm-connectivity-and-or-driver-installation-issues.
Best regards,
Chris
