• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 46 subscribers
  • Views 90 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS1298ECGFE-PDK: Unable to read device id of ADS1298 with Arduino

ADS1298ECGFE-PDK: ADS1298ECGFE-PDK

Ali Khan
Expert 1065 points
Part Number: ADS1298ECGFE-PDK
Other Parts Discussed in Thread: ADS1298

Tool/software:

Hi,

I need PCB design files for ADS1298ECGFE-PDK.
Can someone help me with it plz?

It would be great if it is in Altium format.

I simply want to follow it up for my new design board.

Thanks


  • 0
    TI__Prodigy 400 points

    Hi,

    As in other post, these are the gerber files we have that we can share with you:

    0272.ADS1X98_GERB_A.ZIP

  • 0 in reply to Katelyn Dockery
    Expert 1065 points

    Hi

    Thank you for sharing the files.

    I would like your assistance in reviewing the schematic of my PCB design. Could you kindly share your email address so that I can send the necessary details to you?

    Specifically, I need to confirm if the power circuitry has been designed correctly to meet all requirements of the ADS1298, particularly concerning the grounding scheme. My intention is to maintain a common ground (GND) across all components to ensure a solid GND plane. I understand the importance of separating the analog and digital sections, and I would appreciate your guidance on this matter.

    Would you be able to assist me with this review? Your expertise would be greatly appreciated.

    Looking forward to your response.



  • 0 in reply to Ali Khan
    TI__Prodigy 400 points

    Hi,

    I am unable to review any additional schematics at this time, please reference EVM gerbers and datasheet layout guidelines.

    Best,

    Kate

  • 0 in reply to Katelyn Dockery
    Expert 1065 points

    Hi
    Thanks for your reply.
    I will follow the instructions mentioned in the datasheet.
    I have one question about supplies.
    Is it mandatory to keep separate DVDD and AVDD supplies?
    I couldn't find much information about it.
    Thanks