This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello,
I have installed the Delta-Sigma ADC EvaluaTIon Software and the ADS1x4S08 Device Package onto my Windows 10 Enterprise LTSC - PC.
But if I connected the ADS114S08EVM-Kit and call up the Delta-Sigma ADC EvaluaTIon Software, I see that the only the "Data Anaysis " tool button, is active and no register map will be displayed.
It might be that the Evaluation kit will be not recognized on the computer.
Do you have an idea, where it comes from ?
Best regards
Udo
Hi Udo Weidung,
Can you show me an image of your Device Manager after you have connected the EVM and started the GUI? I would like to see how the EVM enumerates
Also, make sure that you plug in the EVM first, then start the GUI. Vice versa will not work and result in the error you are seeing
If that doesn't work, try following these steps: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/914940/faq-how-do-i-resolve-pamb-evm-connectivity-and-or-driver-installation-issues
-Bryan
Hi Byran,
after doing your following steps, the GUI starts ok and the Register map will be displayed.
Thank you very much!
Best regards
Udo