ADC12DJ3200EVM: The ADC output is not clean all the time

Raj Kumar Ramavath

Tool/software:

Hi,

I am feeding a CW signal from a clean source, but the ADC output is noisy at times, as shown in the attached screenshot. Could you please help me obtain a clean output signal from the ADC? What could be the issue?

over 1 year ago

0 Rob Reeder over 1 year ago

TI__Mastermind 45280 points

Hi Kumar,

Are you using our DJ3200EVM & and FPGA dev kit or is this your own design?

We need more context in order to help you.

Regards,

Rob

0 Raj Kumar Ramavath over 1 year ago in reply to Rob Reeder

Prodigy 50 points

Hi Rob Reeder,

Thank you for prompt replay.

I am using ADC12DJ3200EVM with KCU105 and TI204C JESD IP core from TI.

Regards,

Ramavath Raj Kumar

0 Rob Reeder over 1 year ago in reply to Raj Kumar Ramavath

TI__Mastermind 45280 points

Hi Kumar,

Can you send me a detailed diagram of your test setup?

Also pics may help too.

The issue may be in the HW setup. So the more details the better to help troubleshoot the issue.

Regards,

Rob

Data converters

Data converters forum

ADC12DJ3200EVM: The ADC output is not clean all the time