ADS1278EVM-PDK Question’

Leo Bosch

Other Parts Discussed in Thread: ADS1278EVM-PDK, ADS1278

I’m in the decision state to order the ADS1278EVM-PDK and also interested in the schematic of the MMB0 board and firmware code for this ADS. Is that possible?

Thanks in advance.

Best regards, Leo Bosch.

E-mail: L.Bosch@BCS-Computers.nl

over 16 years ago

Greg Hupp over 16 years ago

TI__Mastermind 23235 points

Mr Bosch -

We can provide the requested information to you. The schematic and firmware will be sent at the below email address. The information is sent as is; we can provide support but are limited to the scope of the EVM-PDK.

Nils Goder over 16 years ago in reply to Greg Hupp

Prodigy 10 points

Greg Hupp said:

Mr Bosch -

We can provide the requested information to you. The schematic and firmware will be sent at the below email address. The information is sent as is; we can provide support but are limited to the scope of the EVM-PDK.

Could you please send the above mentioned schematics and firmware to me as well? I am currently using the ADS1278EVM-PDK to evaluate the ADS1278 for our next design.

Thank you in advance,

Nils Goder

ng@dia-log.de

igor boldin over 15 years ago in reply to Nils Goder

Prodigy 10 points

Mr Bosch -

Could you please send the above mentioned schematics and firmware to me as well? I am currently using the ADS1278EVM-PDK to evaluate the ADS1278 for our next design.

Thank you in advance,

Igor Boldin

ibv247@qip.ru

Greg Hupp over 15 years ago in reply to igor boldin

TI__Mastermind 23235 points

Mr Boldin -

The schematics for the EVM can be found in the user guide that came with the EVM or on the TI website in the product folder (http://focus.ti.com/lit/ug/sbau129d/sbau129d.pdf).

While we are happy to send the firmware to you, I must caution that they are provided "as-is" and use a different communications protocol than you will most likely want to use. I will send them to the email address provided.

Regards,

Greg

Jiri Priskin over 15 years ago in reply to Greg Hupp

Prodigy 10 points

Hello,

I am also happy owner of the ADS1278EVM-PDK, but for my better playing with that evaluation kit it would be nice to have the MMB0 schematics and DSP firmware source code. Could you send me relevant information to e-mail: xprisk01@seznam.cz ?

Thank you in advance for your support, Jiri

Greg Hupp over 15 years ago in reply to Jiri Priskin

TI__Mastermind 23235 points

Mr Priskin -

Please find the ADS1278EVM firmware located in the forum post @ http://e2e.ti.com/support/data_converters/precision_data_converters/f/73/t/60108.aspx.

The MMB0 schematic is available at ftp://ftp.ti.com/pub/data_acquisition/ADCPro/Support/MMB0_Schematic.PDF.

Regards,

Greg

Data converters

Data converters forum

ADS1278EVM-PDK Question’