This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I received the following question from my customer.
The tr(Rise time) and the tf(Fall time) is not shown on the figure3.
Could you show them on the figure3?
Best Regards,
Kuramochi
Hi Kuramochi-san
These parameters are the rise time(tr) and fall time(tf) of the BCLK signal. As it is shown in the SPI Timing Diagram Figure with the SCLK signal, it would be the same with BCKL signal.
Best Regards
Jose Luis Figueroa
Application Engineer