ADC32RF45EVM: Operational Issue

Kashyap Vanparia

Prodigy 100 points

Part Number: ADC32RF45EVM
Other Parts Discussed in Thread: ADC32RF45

Hi I am not able to connect the ADC EVM software with ADC32RF45EVM

over 8 years ago

0 Kashyap Vanparia over 8 years ago

Prodigy 100 points

I also observed that if i select device in select device tab of gui as ADC32RFXX then I am able to connect but if I select ADC32RF45 I am not able to connect it

0 jim s over 8 years ago in reply to Kashyap Vanparia

TI__Guru* 91947 points

Kashyap,

What EVM do you have, an ADC34RF44 or an ADCRF45? What is the EVM revision letter? Are you using the latest version of the GUI from the TI website? If this is an older EVM, this may be your problem. The FTDI device on all of the boards in this family are enumerated and this may be why you are seeing this. Is there a reason why you cannot operate the EVM when you select ADC32RFxx?

Regards,

Jim

0 Kashyap Vanparia over 8 years ago in reply to jim s

Prodigy 100 points

I have ADC33RF45EVM and the revision letter is E

0 jim s over 8 years ago in reply to Kashyap Vanparia

TI__Guru* 91947 points

Kashyap,

If you no longer need support for this issue I would like to close this post.

Regards,

Jim

Data converters

Data converters forum

ADC32RF45EVM: Operational Issue