ADS124S08EVM: DRDY/Dout

Sushmita Chaudhary

Intellectual 320 points

Part Number: ADS124S08EVM
Other Parts Discussed in Thread: ADS124S08, ADS124S06

Is it necessary to connect DRDY pin to Arduino uno for doing SPI(ADS124S08 and Arduino uno)?

over 6 years ago

0 Alexander Smith over 6 years ago

TI__Guru 55312 points

Hi Sushmita,

No, it is not necessary to connect DRDY to an Arduino Uno pin.

As stated in section 9.5.1 of the datasheet: The serial interface consists of five control lines: CS, SCLK, DIN, DOUT/DRDY, and DRDY but can be used with only four or even three control signals. If the ADS124S08 or ADS124S06 is the only device connected to the SPI bus, then the CS input can be tied low so that only SCLK, DIN, and DOUT/DRDY are required to communicate with the device.

0 Sushmita Chaudhary over 6 years ago in reply to Alexander Smith

Intellectual 320 points

Thank you Alexander.

Data converters

Data converters forum

ADS124S08EVM: DRDY/Dout