ADC12DJ2700EVM: Set up for DC coupled Input

Sepeedah Zadeh

Part Number: ADC12DJ2700EVM
Other Parts Discussed in Thread: ADC12DJ2700

Hello team,

Customer needs to evaluate ADC12DJ2700 for their application with a DC coupled input. I see the EVM has a transformer and supports 500kHz-9GHz inputs. Do we have a recommended setup for DC coupled signals?

Thanks

over 5 years ago

0 jim s over 5 years ago

TI__Guru* 91947 points

HSP001-001EVM_A-SCH.pdfSepeedah,

On the EVM, the customer would install R180, R179, R151, and R162, and remove R1, R4, R6, and R9. This would allow them to bring in a differential DC coupled signal on SMA J1 and J3 for channel A, and SMA J4 and J6 for channel B. The board schematic is attached for reference.

Regards,

Jim

0 Sepeedah Zadeh over 5 years ago in reply to jim s

TI__Intellectual 2890 points

Thank you Jim!

Data converters

Data converters forum

ADC12DJ2700EVM: Set up for DC coupled Input