This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The curve are the ADS2807 Output.
the Analog input is related to function generator,
I use with the measurements a sine signal with 1 MHz of frequency
If I raise the signal more than 400 mV the maximum will suppressed.
is it the ADC kapput?
I mesuring without analog signal. Vin = 0 V
the digital Output from ADC is 2570.
but Im Datasheet when Vin =0 V the digital Output is 2048.
why the digital output 2570 and not 2048???
Hi,
the Channel B is ok , the digital Output with Vanalog=0V is 2048, he is ok, but the digital Output from channel A is 2570?